One Step Injection Blow Molding Machine FS-IB60

Descripton

Full Shine's Injection Blow Molding Machine is the advanced machine, combining injection molding mechanism with blow molding mechanism together.
This machine is suitable for processing PP, PE, PC, PS, PETG, & PMMA resins.

Vertical / Front View | Flowchart
High-Speed and Precise Quality, Suitable For Processing PP, PE, PC, PS Materials.
Fully Computerized Design With Self-Diagnostics System, Display Erroneous Message On Touch Screen, Easy For Trouble-Shooting!
Quickly Molds Changing System, Saving Cost and Productive Cycle Time.
All Function Control-On-Board Design, Easy for Operator Changing Data and Modifying Setting Directly On Touch Screen.
The Feature Of Injection Blow Molding Machine, Not Only Bottle Surface Shining, But Also Bottle Body Seamless, Excellent For Production Smaller Bottle.
Hydraulic Is Close Loop System, Controlled By Proportion Pressure and Flow Rate Precisely.
Mold Seat Is Turret-Typed Design, Adopt Angular Index Device To Ensure Accurate Orientation.

Model	FS-IB 60	FS-IB 80
Screw Diameter(mm)	45	63
Screw L/D ratio(L/D)	20/1	20/1
Screw-Speed Range (PRM)	0-180	0-180
*Figures and data are subject to change without notice due to constant research and development.

EXPOSITION OF FULL SHINE'S MACHINE MODEL

	SCREW DIAMETER(M/M)	MACHINE SERIES	MOLD HEAD(DIE HEAD)	MOLD STATION	PRODUCT TYPE
FS-	40	(H) Horizontal	(S) Single Mold Head	(S) Single Mold Station	(O) Original
	45	(P) Parallel	(D) Double Mold Heads	(D) Double Mold Stations	(C) Two Colors
	55	(O) Standard / Oblique	(T) Three Mold Heads		(D) Two Layers
	65	(A) Pneumatic	(F) Four Mold Heads		(T) Three Layers
	75	(L) Frontal	(E) Eight Mold Heads		(F) Four Layers
	80	(I) Lateral			(L) Six Layers
	90				(V) View Stripe
	100				(P) PC baby bottle
Example
FS-	65	P	D	S	D

Model			FS-IB 60	FS-IB 80
1	Injection
2	Screw diameter	mm	45	63
3	Screw L/D ratio	L/D	20/1	20/1
4	Screw-speed range	PRM	0-180	0-180
5	Screw- stroke	mm	127	250
6	Max.shot-weight	GRAM	264	740
7	Mold clamping(injection unit)
8	Injection mold Opening stroke	mm	127	150
9	Injection mold clamping force	ton	60	80
10	Trigger bar length	mm	670	780
11	Max swing radius	mm	460	570
12	Mold clamping(Blowing)
13	Blow mold opening stroke	mm	127	150
14	Blow mold clamping force	ton	10	15
15	Power system
16	Pump motor	hp	30/20	30/30
17	Pump pressure	kg/cm2	170	180
18	Heating capacity	kw	7	10
19	Heating zone	point	4	6
20	Air consumption(Approx)	m3/hr	35	40
21	Air pressure	bar	6-10	10-15
22	Oil tank capacity	L	300	1000
23	Total power consumption	kw	50	60
24	Machine dimension	m	4x1.6x1.9	5.5x1.9x2.5
25	Machine weight	ton	6	8.5

Sample bottles

Operation Panel

Turret-Typed Mold Seat

Mold