AUTOMATA FLAKONFÚVÓ GÉP FS-40PDDL-75

FŐOLDAL TERMÉKEK Automata Flakonfúvó Gép AUTOMATA FLAKONFÚVÓ GÉP FS-40PDDL-75

AUTOMATA FLAKONFÚVÓ GÉP FS-40PDDL-75

LEÍRÁS

  • Különböző anyagok gyártására alkalmas. Pl.: PE, PP, PVC, PC, PETG, PS, PA, TPR, PC, EVA, PBT, Acryl, K-resin, PU, és így tovább.
  • JELLEMZŐI
  • PÁLYÁZATI FELTÉTELEK
  • P series FEATURES
  • Machine Model
  • Two-layer/Single Die-head/Single Station & Two Color /Single Head & Station
  • Single Die-head Single Station Viewstripe & Double Die-head Single Station Viewstripe
  • PC/PVC/PTEG
  • FOTÓK
  • JELLEMZŐI
  • Különböző anyagok gyártására alkalmas. Pl.: PE, PP, PVC, PC, PETG, PS, PA, TPR, PC, EVA, PBT, Acryl, K-resin, PU, és így tovább.
  • HMI Érintőképernyő (Opció).
  • Elektromos PLC vezérlés.
  • A szerszámfelfogó karjai egy enes mozgást végeznek.
  • Egy enes csúszka, (német gyártmány).
  • Kérhető felszerelés: falvastagságszabályzó/programozó (Opció).
  • Nagy hatékonyságú csiga az anyag teljes megolvasztására és továbbítására.
  • Nitrogenizált Csiga és henger.
  • Különleges hűtési cirkuláció a fúvótüskén belül (a Full Shine tervei alapján).
  • A sebességváltó németroszágban, az átalakító japánban készült.
  • A csiga forgási sebességét az átalakító vezérli, mely a csiga sebességét a különböző termékek szükségleteinek megfelelően alakítja.
  • Speciális rendszer a stabil és gyors szerszámfelfogáshoz./li>
  • A felemelt fej mechanizmus gyors préselést biztosít./li>
  • A fúvás pozíciója változtatható. Ez a Full Shine Innovációja.
  • Párhuzamos szerszámfelfogó mozgás, automatikus sorja mentesítő, szivárgás tesztelő, In-mold label funkció./li>
  • Automatikus olajozás a szerszámfelfogó számára a súrlódások csökkentésére.
  • Alkalmas Szintjelző csíkkal rendelkező flakonok gyártására.
  • Minden fémalkatrész minőségnövelő eljárásokon megy keresztül. Ilyenek például a következők: hőkezelés, nitridálás, krómozás, galvanizálás a rozsdásodás elkerülése érdekében.
Model FS-40 PSSD FS-45 PSSD FS-55 PSSD FS-65 PSSD
TYPE Two-layer/Single Die-head/Single Station
Material PE PE PE PE
Screw diameter (m/m) 40/25 45/25 55/25 65/25
Screw L/D ratio (L/D) 24/1 24/1 24/1 24/1
*Figures and data are subject to change without notice due to constant research and development.
  • Suitable for making plastic products from 5ml up to 500L. Full Shine provides various machineries for best choices, such as A, O, H, P, I, and L Series Blow Molding Machines.
  • Die Head is torpedo design with special flow channel for swift and complete mergence of plastic material inside and to provide better plasticized feature.
  • Various Die Heads from single, double, three, up to eight die heads for the better choice. Parison extrusion speed can be separately controlled by throttles.
  • Die Mouth Extrusion Adjustment by 3-point adjustment; simple and safe way for the operator.
  • High-melting Screw design by SACM 645 steel alloy for better mergence of resin. Force-feeding design for the customized screw as an option.
  • Based on specific material, incorporating with high-melting screw design, the machinery can process:
    PE, PP, PVC, PS, PETG, PA, TPR, PC, EVA, and K-resin.
  • Cutting parison by electric-heated Hot Cutter for cutting the parison of different resin. Multi-die head is available by Cold Cutter.
  • Blow Pin is driven by air pressure for neck twist-off design for precise and forced neck flash removal.
  • Blow Pin up/down, left/right, front/back adjustment is done by slide-board unit with the hand wheels for easy and accurate adjustment.
  • Blow Pin Mandrel has the chill-water circulation or to add the air-exhaust feature for forming the bottle neck precisely.
  • Blow Pin Pre-lift design before mold open, which is suitable for removing neck flash and ensure the cutting ring of the mold for long-term use.
  • Blow Pin movement is driven by the solenoid valve for precise micro pre-lift movement to ensure the neck accuracy of small-necked bottles.
  • Central distance of Blow Pins can be adjusted by Full Shine’s special design.
  • Hydraulic System from YUKEN proportional control to provide strong and powerful mechanical movement and hydraulic clamping circuit.
  • The moving areas are with the manual self-lubricated devices to ensure the parts for better durability and wear-proof.
  • Full Shine special-designed Brake system for the Carriage to provide stable movement and swift positioning.
  • Mold Carriage connects to the bottle line-up frame.
  • Extruder Platen with the special design for up/down adjustment to provide the flexible distance between the extruding mouth and the mold. Mold Platen moving system is driven by roller chain for stable performance.
  • Option: Auto Jar Neck Cutting Device, for cutting jar-neck/ wide-neck bottles with flat and smooth neck surface.
  • Option: Parison Wall Thickness Controller, from MOOG/YUKEN, Japan to provide multi-point thickness control to ensure the equal-thickness parison, available for 30, 32, 100, and 400-point control, and with the separate hydraulic system and stainless steel oil tank to provide the stable and high-performance close-loop servo circuit.
  • Option: Top & Bottom Deflashing Device is to remove the overflow around the plastic products automatically. The device is driven by pneumatic and hydraulic system to ensure the complete deflashing performance, and also can add the post-cooling function.
  • Option: Innovative Blowing Unit Left/Right Swift Movement, driven by the hydraulic system for fast and efficient mold-changing.
  • Option: HMI Touch Screen from Japan, to provide all function-and-setting control on the screen, such as mold file saving, error message report, and I/O monitor.
  • Option: Computerized Keypad Screen from Taiwan, to provide all function-and-setting control on the keypad, such as mold file saving, error message report, and I/O monitor.
  • Option: Servo Control System for Machine Operation, from Yuken, Japan or Taiwan, with the close-loop system for accurate machine performance and saving power; furthermore, available for upgrading to fully-electric system.
  • Customized designs of blow molding machines are available to meet the customer’s special request.
  • Innovative design and user-friendly machine to provide fast mold-changing, material-changing, and color-changing to satisfy the customer’s request: on-time production.
  • PVC machinery with the special-designed screw, the barrel ventilator and air-exhaust design to ensure stable heating performance and to prevent the over-burned PVC issue.
 
EXPOSITION OF FULL SHINE'S MACHINE MODEL
  SCREW DIAMETER(M/M) MACHINE SERIES MOLD HEAD(DIE HEAD) MOLD STATION PRODUCT TYPE
FS- 40 (H) Horizontal (S) Single Mold Head (S) Single Mold Station (O) Original
45 (P) Parallel (D) Double Mold Heads (D) Double Mold Stations (C) Two Colors
55 (O) Standard / Oblique (T) Three Mold Heads   (D) Two Layers
65 (A) Pneumatic (F) Four Mold Heads   (T) Three Layers
75 (L) Frontal (E) Eight Mold Heads   (F) Four Layers
80 (I) Lateral     (L) Six Layers
90       (V) View Stripe
100       (P) PC baby bottle
Example
FS- 65 P D S D
Model  FS-40 PSSD FS-45 PSSD FS-55 PSSD FS-65 PSSD FS-75 PSSD FS-55 PSSC FS-65 PSSC FS-75 PSSC
TYPE   Two-layer /Single Die-head /Single Station Two Color /Single Head & Station
1 Material   PE PE PE PE PE PE PE PE
2 Screw diameter m/m 40/25 45/25 55/25 65/25 75/25 55/55 65/65 75/75
3 Screw L/D ratio L/D 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1
4 Screw R.P.M. speed r.p.m. 20-66 15-61 15-60 15-60 15-58 15-60 15-60 15-58
5 Inverter motor HP 5/2 7.5/2 10/2 15/2 25/2 10/10 15/15 25/25
6 Oil hydraulic drive motor HP 5 7.5 10 10 15 10 10 15
7 Optional air compressor HP 5 5 7.5 7.5 10 7.5 7.5 10
8 Air pressure Kg/cm2 4-6 4-6 5-7 5-7 5-7 5-7 5-7 5-7
9 Clamping force Ton 2.8 3.9 4.4 6.9 10 4.4 6.9 10
10 Oil tank capacity Gallon 38 55 60 80 120 60 80 120
11 Number of heaters ZONE 6 6 6 7 7 6 6 7
12 Heating capacity KW 9.5 12 15 19.5 22 19 24.5 26
13 Total installed power KW 19 25 32 40.5 44 43 56 77
14 Extruding capacity per hour Kg/hr 15 24 42 55 75 42 55 75
15 Dry cycle per hour time/hr 1285 1030 880 720 650 880 720 600
16 Product  capacity c.c./L 15-500 60-1000 150-2500 1L-5L 1L-10L 150-2500 1L-5L 1L-10L
17 Product weight g. 5-40 10-100 20-170 40-280 80-500 20-170 40-280 80-500
18 Min./Max. diameter of product m/m 10-75 20-100 30-140 50-200 80-260 30-140 50-200 80-260
19 Extruding mouth outer diameter m/m 50 56 80 150 200 80 150 200
20 Mold center distance m/m * * * * * * * *
21 Clamping distance m/m 50-320 50-410 140-540 160-670 50-410 140-540 160-670 160-670
22 Length of mold capacity m/m 146-266 155-290 160-380 223-426 155-290 160-380 223-426 240-460
23 Width of mold capacity m/m 300 320 360 430 320 360 430 430
24 Machine net weight Kg 3300 3800 4700 7600 3800 4700 7600 7300
25 Machine dimension m 2.6*1.85*2.7 3*1.9*2.8 3.1*2*2.8 3.6*1.6*3.1 4.2*1.7*3.2 3.1*2*2.8 3.6*1.6*3.1 4.2*1.7*3.2
Model  FS-45 PSSV FS-55 PSSV FS-65 PSSV FS-75 PSSV FS-90 PSSV FS-45 PDSV FS-55 PDSV FS-65 PDSV FS-75 PDSV FS-90 PDSV
TYPE   Single Die-head Single Station Viewstripe Double Die-head Single Station Viewstripe
1 Material   PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
2 Screw diameter m/m 45/25 55/25 65/25 75/25 90/25 45/25 55/25 65/25 75/25 90/25
3 Screw L/D ratio L/D 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1
4 Screw R.P.M. speed r.p.m. 15-61/5-25 15-60/5-25 15-60/5-25 15-58/5-25 15-56/5/25 15-61/5-25 15-60/5-25 15-60/5-25 15-58/5-25 15-58/5-25
5 Inverter motor HP 7.5/2 10/2 15/2 25/2 40/2 7.5/2 10/2 15/2 25/2 40/2
6 Oil hydraulic drive motor HP 7.5 10 10 15 15 7.5 10 10 15 15
7 Optional air compressor HP 5 7.5 7.5 10 15 5 7.5 7.5 10 15
8 Air pressure Kg/cm2 4-6 4-6 5-7 5-7 5-7 4-6 5-7 5-7 5-7 6-8
9 Clamping force Ton 3.9 4.4 6.9 9.5 13 3.9 4.4 6.9 9.5 13
10 Oil tank capacity Gallon 55 60 80 120 250 55 60 80 120 250
11 Number of heaters ZONE 6 6 7 7 9 8 10 10 10 12
12 Heating capacity KW 11.5 14.5 18.8 23 29.5 14.5 18.8 20.3 25 36
13 Total installed power KW 24.5 31.5 40.5 54.5 72.5 27.5 36.5 43 57 80
14 Extruding capacity per hour Kg/hr 30 42 61 81 106 30 42 61 81 106
15 Dry cycle per hour time/hr 1030 880 720 650 650 1030 800 720 650 650
16 Product  capacity c.c./L 60-1000 150-2500 500-5000 1L-10L 10L-20L 40-500 100-1250 280-1800 0.5L-2.5L 1L-5L
17 Product weight g. 10-100 20-170 40-280 80-500 120-370 5-40 10-100 20-170 40-170 80-280
18 Min./Max. diameter of product m/m 20-100 30-140 50-200 80-260 150-340 20-70 30-85 40-100 40-130 100-160
19 Extruding mouth outer diameter m/m 56 80 150 200 280 42 50 65 80 150
20 Mold center distance m/m * * * * * 100 120 140 160 200
21 Clamping distance m/m 50-320 50-410 140-540 160-670 160-670 50-320 50-140 140-540 160-670 160-670
22 Length of mold capacity m/m 146-266 155-290 160-380 223-426 288-556 146-266 155-290 160-380 223-426 288-556
23 Width of mold capacity m/m 300 320 360 430 520 300 320 360 430 520
24 Machine net weight Kg 3600 3800 4700 7600 8600 3700 3900 4800 7700 8700
25 Machine dimension m 3*1.4*2.9 3*1.5*2.9 3.6*1.6*3.2 4.2*1.7*3.3 5.2*1.9*4.1 3*1.6*2.9 3*1.7*2.9 3.6*1.6*3.2 4.2*1.7*3.3 5.2*1.9*4.1
Model  FS-45 PSSP FS-55 PSSP FS-65 PSSP FS-40 PSSO FS-45 PSSO FS-55 PSSO FS-65 PSSO FS-40 PDSO FS-45 PDSO FS-55 PDSO FS-65 PDSO FS-40 PSSO FS-45 PSSO FS-55 PSSO
TYPE    Single Die-head/Single Station  Single Die-head/Single Station Double Die-head/Single Station Single Die-head/Single Station
1 Material   PC PC PC PVC PVC PVC PVC PVC PVC PVC PVC PETG PETG PETG
2 Screw diameter m/m 45 55 65 40 45 55 65 40 45 55 65 40 45 55
3 Screw L/D ratio L/D 26/1 26/1 26/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 24/1 26/1 26/1 26/1
4 Screw R.P.M. speed r.p.m. 20-61 20-60 20-58 20-66 20-61 20-60 20-58 20-66 20-61 20-60 20-58 20-66 20-61 20-60
5 Inverter motor HP 10 15 20 7.5 10 15 20 7.5 10 15 20 7.5 10 15
6 Oil hydraulic drive motor HP 7.5 10 10 5 7.5 10 10 5 7.5 10 10 5 7.5 10
7 Optional air compressor HP 7.5 7.5 10 7.5 7.5 7.5 10 7.5 7.5 7.5 10 7.5 7.5 7.5
8 Air pressure Kg/cm2 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7
9 Clamping force Ton 3.9 4.4 6.9 2.8 3.9 4.4 6.9 2.8 3.9 4.4 6.9 2.8 3.9 4.4
10 Oil tank capacity Gallon 55 60 80 38 55 60 80 38 55 60 80 38 55 60
11 Number of heaters ZONE 4 4 5 4 4 4 5 6 6 7 8 4 4 4
12 Heating capacity KW 9.5 12.5 16.8 7 9.5 12.5 16.8 7.5 10.25 13.6 17.5 7.5 9.5 12.5
13 Total installed power KW 23 32 40 15 23 32 40 17 23.5 33 41 17.5 23 32
14 Extruding capacity per hour Kg/hr 24 36 55 15 24 36 55 15 24 36 55 19 24 36
15 Dry cycle per hour time/hr 1030 880 720 1285 1030 880 720 1285 1030 880 720 1285 1030 880
16 Product  capacity c.c./L 200-900 300-1800 1L-4L 15-400 200-1000 500-2000 1L-4L 15-200 60-400 200-900 500-1500 15-200 200-900 500-1800
17 Product weight g. 10-65 20-170 40-200 5-40 10-65 20-170 40-200 4-25 5-30 10-50 25-110 5-40 10-65 20-110
18 Min./Max. diameter of product m/m 20-90 30-120 50-200 10-75 10-100 30-140 50-200 10-65 20-70 30-85 40-95 10-65 10-90 30-120
19 Extruding mouth outer diameter m/m 60 80 120 50 60 80 120 38 40 50 65 50 60 80
20 Mold center distance m/m * * * * * * * 85 100 120 140 * * *
21 Clamping distance m/m 50-320 50-410 140-540 20-230 50-320 50-410 140-540 20-230 50-320 50-410 140-540 20-230 50-320 50-410
22 Length of mold capacity m/m 120-290 140-330 160-340 100-210 120-290 140-330 160-340 100-210 120-290 140-330 160-340 100-210 120-290 140-330
23 Width of mold capacity m/m 280 306 350 200 280 306 350 200 280 306 350 200 280 306
24 Machine net weight Kg 3000 3500 4400 2500 3000 3500 4400 2500 3200 3700 4600 2500 3000 3500
25 Machine dimension m 3*1.85 *2.3 3*1.9 *2.45 3.6*2*2.5 2.3*1.7 *2.2 3*1.85 *2.3 3*1.9 *2.45 3.6*2*2.5 2.3*1.7 *2.2 3*1.85 *2.3 3*1.9 *2.45 3.6*2 *2.5 2.3*1.7 *2.2 3*1.85 *2.3 3*1.9 *2.45
FOTÓK
Mintaüvegek
FOTÓK
Mintaüvegek
FOTÓK
Hajlíott karos szerszám zárás
FOTÓK
Különleges kiképzésű extruder fej 2-6 rétegű flakonhoz,
FOTÓK
szerelt hajtómű.
FOTÓK
szervomotor hajtással. Közvetlen