Descripton

  • FS-BT-S is equipped with 2-station servo table and side-blow system. After preform injection, the servo table rotates 180 degrees, a servo screw then transfers a neck plate with PETIPC preforms to the side-blow station for blowing bottles. Using side-blow system is available and flexible for a bigger work place, and optional devices; gate trimmer (preform tail cutting device) and product conveyor can easily be mounted inside the machine to go on the automatic production. This model is good for small containers with short cycle time.
  • Jar/wide-mouth bottle available, FS-BT-J has the same benefits of FS-BT-S, but is for wide-mouth jar applications, and it's a stronger machine with higher injection capacity and stronger clamping force.
  • Innovative approach by 2-station machine operation, FS-BT-S/FS-BT-J need less neck cavities, less mold cost, and has a more effective mold width to save the total cost. Mold cost is an important investment in running diversified and various products lines. The tooling'mold cost in our simple and innovative system is the lowest of all.
  • Features
  • Bottle Condition
  • Specifcation
  • PHOTOS
  • Features
  • Simple: From injecting preforms to blow bottles, the whole process is done by one production cycle, which saves the cost of the investment in various machines to achieve the same production.
  • Easy: Easy for operation; simple and durable mechanical structure for the long term use.
  • Economical: Minimized mold parts for more economic tooling cost.
  • Flexible: Perfect for diversified and low volume bottles, such as cosmetics, shampoo and pharmaceutical bottles.
  • User Friendly: Fully computerized touch screen provides user-friendly operation interface.
  • Energy saving: In-mold heat preconditioning feature; no extra heaters required.
  • Standardized: Standard and well-known pneumatic and hydraulic parts are widely available.
  • Thorough: Thorough service from providing know-how and service from tooling design to final product.

Bottle Condition for FS-BT-3S :
Round bottle with standred neck

Volume(ml) Height(mm) Neck(mm) Pitch(mm) B/DIA(mm) Cavity(pcs)
<2000 300 <50 150 <120 2
<500 300 <38 75 <70 4
<200 300 <22 50 <45 6
<50 600 <15 37.5 <33 8


Bottle Condition for FS-BT-4S :
Round bottle with standred neck

Volume(ml) Height(mm) Neck(mm) Pitch(mm) B/DIA(mm) Cavity(pcs)
<1500 300 <45 105 <100 4
<400 300 <38 70 <65 6
<200 300 <22 52 <65 6


Bottle Condition for FS-BT-3J :
Round bottle with jar neck

Volume(ml) Height(mm) Neck(mm) Pitch(mm) B/DIA(mm) Cavity(pcs)
<1500 300 <83 125 <110 2
<1000 300 <63 98 <94 3
<600 300 <38 65 <60 4
Model Unit FS-TB3S FS-TB3J FS-TB4S FS-TB4J
Injection unit
Screw diameter mm 28 42 45 50
Screw L/D ratio L/D 20/1 20/1 20/1 20/1
Screw speed range RPM 0-100 0-100 0-100 0-100
Max. shot-weight cm3 86 194 223 373
Mold clamping (ingection unit)
Injection mold opening stroke mm 300 300 300 300
Injection mold clamping force ton 40 120 60 200
Max swing radius mm 180 180 180 180
Mold clamping (blowing)
Blow mold opening strok mm 120 120 140 200
Blow mold clamping force ton 20 30 30 50
Stretch stroke mm 300 300 300 300
Power system
Pump motor hp/kw 25/18.5 25/18.5 40/29.7 40/29.7
Heating capacity kw 9.5 9.5 11.6 11.6
Table servo motor hp/kw 1.0/0.75 2.0/1.5 3.0/2.2 3.0/2.2
Total power consumption kw 29.5 29.5 43.5 43.5
Air system
Air pressure bar 9 9 9 9
Processing air pressure(approx) kg/cm2 25 25 25 25
Hydraulic system
Oil tank capacuty liter 250 250 450 450
System max, pressure kg/cm2 140 140 140 140
Cooling water capacity L/min 400 400 600 600

a) Specifications are subject to change without prior notice.
b) Please feel free to contact us for special requirements.
c) Screw diameter could be different depends on product weight.
d)Clamping force could be different depends on product neck diameter.

PHOTOS
Sample bottles
PHOTOS
Detergeny
PHOTOS
Edible Oil
PHOTOS
Foam
PHOTOS
Jar
PHOTOS
Mosquito
PHOTOS
Pharmacy
PHOTOS
Sause
PHOTOS
Shampoo
PHOTOS
Shampoo
PHOTOS
Trigger
PHOTOS
Water 600ml

PRM Taiwan Designed by Polaris