Descripton

FS-BT-S is equipped with 2-station servo table and side-blow system. After preform injection, the servo table rotates 180 degrees, a servo screw then transfers a neck plate with PETIPC preforms to the side-blow station for blowing bottles. Using side-blow system is available and flexible for a bigger work place, and optional devices; gate trimmer (preform tail cutting device) and product conveyor can easily be mounted inside the machine to go on the automatic production. This model is good for small containers with short cycle time.
Jar/wide-mouth bottle available, FS-BT-J has the same benefits of FS-BT-S, but is for wide-mouth jar applications, and it's a stronger machine with higher injection capacity and stronger clamping force.
Innovative approach by 2-station machine operation, FS-BT-S/FS-BT-J need less neck cavities, less mold cost, and has a more effective mold width to save the total cost. Mold cost is an important investment in running diversified and various products lines. The tooling'mold cost in our simple and innovative system is the lowest of all.

Features
Bottle Condition
Specifcation
PHOTOS
Features

Simple: From injecting preforms to blow bottles, the whole process is done by one production cycle, which saves the cost of the investment in various machines to achieve the same production.
Easy: Easy for operation; simple and durable mechanical structure for the long term use.
Economical: Minimized mold parts for more economic tooling cost.
Flexible: Perfect for diversified and low volume bottles, such as cosmetics, shampoo and pharmaceutical bottles.
User Friendly: Fully computerized touch screen provides user-friendly operation interface.
Energy saving: In-mold heat preconditioning feature; no extra heaters required.
Standardized: Standard and well-known pneumatic and hydraulic parts are widely available.
Thorough: Thorough service from providing know-how and service from tooling design to final product.

Bottle Condition for FS-BT-3S :
Round bottle with standred neck

Volume(ml)	Height(mm)	Neck(mm)	Pitch(mm)	B/DIA(mm)	Cavity(pcs)
<2000	300	<50	150	<120	2
<500	300	<38	75	<70	4
<200	300	<22	50	<45	6
<50	600	<15	37.5	<33	8

Bottle Condition for FS-BT-4S :
Round bottle with standred neck

Volume(ml)	Height(mm)	Neck(mm)	Pitch(mm)	B/DIA(mm)	Cavity(pcs)
<1500	300	<45	105	<100	4
<400	300	<38	70	<65	6
<200	300	<22	52	<65	6

Bottle Condition for FS-BT-3J :
Round bottle with jar neck

Volume(ml)	Height(mm)	Neck(mm)	Pitch(mm)	B/DIA(mm)	Cavity(pcs)
<1500	300	<83	125	<110	2
<1000	300	<63	98	<94	3
<600	300	<38	65	<60	4

Model	Unit	FS-TB3S	FS-TB3J	FS-TB4S	FS-TB4J
Injection unit
Screw diameter	mm	28	42	45	50
Screw L/D ratio	L/D	20/1	20/1	20/1	20/1
Screw speed range	RPM	0-100	0-100	0-100	0-100
Max. shot-weight	cm3	86	194	223	373
Mold clamping (ingection unit)
Injection mold opening stroke	mm	300	300	300	300
Injection mold clamping force	ton	40	120	60	200
Max swing radius	mm	180	180	180	180
Mold clamping (blowing)
Blow mold opening strok	mm	120	120	140	200
Blow mold clamping force	ton	20	30	30	50
Stretch stroke	mm	300	300	300	300
Power system
Pump motor	hp/kw	25/18.5	25/18.5	40/29.7	40/29.7
Heating capacity	kw	9.5	9.5	11.6	11.6
Table servo motor	hp/kw	1.0/0.75	2.0/1.5	3.0/2.2	3.0/2.2
Total power consumption	kw	29.5	29.5	43.5	43.5
Air system
Air pressure	bar	9	9	9	9
Processing air pressure(approx)	kg/cm2	25	25	25	25
Hydraulic system
Oil tank capacuty	liter	250	250	450	450
System max, pressure	kg/cm2	140	140	140	140
Cooling water capacity	L/min	400	400	600	600

a) Specifications are subject to change without prior notice.
b) Please feel free to contact us for special requirements.
c) Screw diameter could be different depends on product weight.
d)Clamping force could be different depends on product neck diameter.

Sample bottles

Detergeny

Edible Oil

Foam

Jar

Mosquito

Pharmacy

Sause

Shampoo

Trigger

Water 600ml