• English Español Türkçe Magyar العربية 繁體中文 Tiếng Việt Nam

AUTOMATA FLAKONFÚVÓ GÉP P Széria

FŐOLDAL TERMÉKEK Automata Flakonfúvó Gép AUTOMATA FLAKONFÚVÓ GÉP P Széria

AUTOMATA FLAKONFÚVÓ GÉP P Széria

LEÍRÁS

  • Különböző anyagok gyártására alkalmas. Pl.: PE, PP, PVC, PC, PETG, PS, PA, TPR, PC, EVA, PBT, Acryl, K-resin, PU, és így tovább.
ÉRDEKLŐDÉS
Video
  • JELLEMZŐI
  • Machine Model
  • Single Die-head/Single Station
  • Double Die-head/Single Station
  • Three Die-head/Single Station
  • Four Die-head/Single Station
  • Single Die-head/Double Station
  • Double Die-head/Double Station
  • Three Die-head/Double Station
  • Single Die-head Single Station Viewstripe
  • Double Die-head Single Station Viewstripe
  • FOTÓK
  • Video
  • JELLEMZŐI
  • Különböző anyagok gyártására alkalmas. Pl.: PE, PP, PVC, PC, PETG, PS, PA, TPR, PC, EVA, PBT, Acryl, K-resin, PU, és így tovább.
  • HMI Érintőképernyő (Opció).
  • Elektromos PLC vezérlés.
  • A szerszámfelfogó karjai egy enes mozgást végeznek.
  • Egy enes csúszka, (német gyártmány).
  • Kérhető felszerelés: falvastagságszabályzó/programozó (Opció).
  • Nagy hatékonyságú csiga az anyag teljes megolvasztására és továbbítására.
  • Nitrogenizált Csiga és henger.
  • Különleges hűtési cirkuláció a fúvótüskén belül (a Full Shine tervei alapján).
  • A sebességváltó németroszágban, az átalakító japánban készült.
  • A csiga forgási sebességét az átalakító vezérli, mely a csiga sebességét a különböző termékek szükségleteinek megfelelően alakítja.
  • Speciális rendszer a stabil és gyors szerszámfelfogáshoz./li>
  • A felemelt fej mechanizmus gyors préselést biztosít./li>
  • A fúvás pozíciója változtatható. Ez a Full Shine Innovációja.
  • Párhuzamos szerszámfelfogó mozgás, automatikus sorja mentesítő, szivárgás tesztelő, In-mold label funkció./li>
  • Automatikus olajozás a szerszámfelfogó számára a súrlódások csökkentésére.
  • Alkalmas Szintjelző csíkkal rendelkező flakonok gyártására.
  • Minden fémalkatrész minőségnövelő eljárásokon megy keresztül. Ilyenek például a következők: hőkezelés, nitridálás, krómozás, galvanizálás a rozsdásodás elkerülése érdekében.
 
EXPOSITION OF FULL SHINE'S MACHINE MODEL
  SCREW DIAMETER(M/M) MACHINE SERIES MOLD HEAD(DIE HEAD) MOLD STATION PRODUCT TYPE
FS- 40 (H) Horizontal (S) Single Mold Head (S) Single Mold Station (O) Original
45 (P) Parallel (D) Double Mold Heads (D) Double Mold Stations (C) Two Colors
55 (O) Standard / Oblique (T) Three Mold Heads   (D) Two Layers
65 (A) Pneumatic (F) Four Mold Heads   (T) Three Layers
75 (L) Frontal (E) Eight Mold Heads   (F) Four Layers
80 (I) Lateral     (L) Six Layers
90       (V) View Stripe
100       (P) PC baby bottle
Example
FS- 65 P D S D
MODEL FS-40 PSSO FS-45 PSSO FS-55 PSSO FS-65 PSSO FS-75 PSSO FS-90 PSSO
Material PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 40 45 55 65 75 90
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 20-66 15-61 15-60 15-60 15-58 15-56
Inveter motor(HP) 5 7.5 10 15 25 40
Oil hydraulic drive motor(HP) 5 7.5 10 10 15 30
Optional air compressor(HP) 5 5 7.5 7.5 10 15
Air pressurer(kg/cm2) 4-6 4-6 4-6 5-7 5-7 6-8
Clamping force(Ton) 2.8 3.9 4.4 6.9 10 5.2
Oil tank capacity(Gallon) 38 55 60 80 120 250
Nunber of heaters(ZONE) 4 4 4 5 5 7
Heating capacity(KW) 7 9.5 12.5 16.8 18 20.5
Total installed power(KW) 15 21 30 43.5 48 62
Extruding capacity per hour(kg/hr) 15 24 36 55 75 100
Dry cycle per hour(time/hr) 1285 1030 880 720 650 650
Product capacity(c.c./L) 15-500 60-1000 150-2500 500-5000 5L-10L 10L-20L
Product weight(g.) 5-40 10-100 20-170 40-280 200-370 500-900
Min./Max. diameter of product(m/m) 10-75 20-100 30-140 50-200 80-260 150-340
Extruding mouth outer diameter(m/m) 50 56 80 150 200 280
Mold center distance(m/m) * * * * * *
Clamping distance(m/m) 120-230 130-320 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 100-210 146-266 155-590 160-380 223-426 288-556
Width of mold capacity(m/m) 200 300 320 430 480 560
Machine net weight(kg) 2500 3000 3500 4400 7300 8300
Machine dimension(m) 2.3*1.4*2.2 3*1.4*2.3 3*1.5*2.3 3.2*1.6*2.6 4.2*1.7*2.7 4.1*1.9*3.6
MODEL FS-40 PDSO FS-45 PDSO FS-55 PDSO FS-65 PDSO FS-75 PDSO FS-90 PDSO
Material PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 40 45 55 65 75 90
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 20-66 15-61 15-60 15-60 15-58 15-58
Inveter motor(HP) 5 7.5 10 15 25 60
Oil hydraulic drive motor(HP) 5 7.5 10 10 15 30
Optional air compressor(HP) 5 5 7.5 7.5 10 15
Air pressurer(kg/cm2) 4-6 4-6 5-7 5-7 5-7 6-8
Clamping force(Ton) 2.8 3.9 4.4 6.9 10 5.2
Oil tank capacity(Gallon) 38 55 60 80 120 250
Nunber of heaters(ZONE) 6 6 7 8 8 11
Heating capacity(KW) 7 10.25 13.6 17.5 19 33
Total installed power(KW) 15.5 22 29.5 37 50 67
Extruding capacity per hour(kg/hr) 15 24 36 55 75 100
Dry cycle per hour(time/hr) 1285 1030 880 720 650 650
Product capacity(c.c./L) 15-200 50-500 100-1250 280-1800 0.5L-2.5L 1L-5L
Product weight(g.) 4-25 5-40 10-100 20-170 40-170 80-280
Min./Max. diameter of product(m/m) 10-65 20-70 30-85 40-100 40-130 100-160
Extruding mouth outer diameter(m/m) 38 42 50 65 80 150
Mold center distance(m/m) 85 100 120 140 160 180
Clamping distance(m/m) 120-230 130-320 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 100-210 146-266 155-590 160-380 223-426 288-556
Width of mold capacity(m/m) 200 300 320 430 480 560
Machine net weight(kg) 2600 3200 3700 4600 7500 8500
Machine dimension(m) 2.3*1.4*2.2 3*1.4*2.3 3*1.5*2.3 3.2*1.6*2.6 4.2*1.7*2.7 5.2*1.9*3.5
MODEL FS-40 PTSO FS-45 PTSO FS-55 PTSO FS-65 PTSO FS-75 PTSO FS-90 PTSO
Material PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 40 45 55 65 75 90
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 20-66 15-61 15-60 15-60 15-58 15-58
Inveter motor(HP) 5 7.5 10 15 25 60
Oil hydraulic drive motor(HP) 5 7.5 10 10 15 30
Optional air compressor(HP) 7.5 7.5 10 10 15 20
Air pressurer(kg/cm2) 4-6 4-6 5-7 5-7 5-7 6-8
Clamping force(Ton) 2.8 3.9 4.4 6.9 10 5.2
Oil tank capacity(Gallon) 38 55 60 80 120 250
Nunber of heaters(ZONE) 8 8 9 10 10 11
Heating capacity(KW) 8.5 12 15 19.3 21.5 42.8
Total installed power(KW) 16.5 23.5 32 39 52.5 88
Extruding capacity per hour(kg/hr) 15 24 36 55 75 100
Dry cycle per hour(time/hr) 1250 1000 850 720 650 650
Product capacity(c.c./L) 10-125 20-325 40-825 100-1000 180-1500 1L-3L
Product weight(g.) 3-10 5-25 10-50 10-90 15-145 80-200
Min./Max. diameter of product(m/m) 10-45 20-55 30-55 30-80 30-95 60-110
Extruding mouth outer diameter(m/m) 30 37 40 55 80 98
Mold center distance(m/m) 75+75 85+85 100+100 120+120 120+120 180+180
Clamping distance(m/m) 120-230 130-320 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 100-210 146-266 155-590 160-380 223-426 288-556
Width of mold capacity(m/m) 200 300 320 430 480 560
Machine net weight(kg) 2800 3400 3900 4900 7900 8900
Machine dimension(m) 2.3*1.4*2.2 3*1.4*2.3 3*1.5*2.3 3.2*1.6*2.6 4.2*1.7*2.7 5.2*1.9*3.5
MODEL FS-55 PFSO FS-65 PFSO FS-75 PFSO FS-90 PFSO
Material PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 55 65 75 90
Screw L/D ratio(L/D) 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 15-60 15-60 15-58 15-58
Inveter motor(HP) 15 20 30 60
Oil hydraulic drive motor(HP) 10 15 15 30
Optional air compressor(HP) 15 15 20 20
Air pressurer(kg/cm2) 6-8 6-8 6-8 6-8
Clamping force(Ton) 4.4 6.9 10 5.2
Oil tank capacity(Gallon) 60 80 120 250
Nunber of heaters(ZONE) 11 13 13 11
Heating capacity(KW) 16.5 20.8 25.7 42.8
Total installed power(KW) 37.5 48 61 88
Extruding capacity per hour(kg/hr) 36 55 75 100
Dry cycle per hour(time/hr) 750 750 650 650
Product capacity(c.c./L) 30-200 100-500 300-1000 500-2500
Product weight(g.) 10-25 10-40 15-90 40-170
Min./Max. diameter of product(m/m) 20-55 30-55 30-90 30-90
Extruding mouth outer diameter(m/m) 37 42 50 75
Mold center distance(m/m) 85+85+85 85+85+85 180+180+180 180+180+180
Clamping distance(m/m) 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 155-290 160-380 243-466 288-556
Width of mold capacity(m/m) 430 480 520 560
Machine net weight(kg) 4100 5200 8300 9300
Machine dimension(m) 3.1*1.8*2.3 3.2*1.9*2.6 4.3*2*2.7 5.2*3.1*3.5
MODEL FS-45 PSDO FS-55 PSDO FS-65 PSDO FS-75 PSDO FS-90 PSDO FS-100 PSDO
Material PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 45 55 65 75 90 100
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 28/1 28/1
Screw R.P.M speed(r.p.m.) 15-62 15-60 15-60 15-58 15-56 20-65
Inveter motor(HP) 7.5 10 15 30 75 75
Oil hydraulic drive motor(HP) 7.5 10 10 15 30 40
Optional air compressor(HP) 10 15 15 20 30 30
Air pressurer(kg/cm2) 4-6 4-6 5-7 5-7 6-8 6-8
Clamping force(Ton) 3.9 4.4 6.9 10 5.2 6.5
Oil tank capacity(Gallon) 60 80 120 160 250 300
Nunber of heaters(ZONE) 4 4 5 5 11 8
Heating capacity(KW) 9.5 12.5 16.8 18 20.5 36
Total installed power(KW) 22 28 37 53 63 114
Extruding capacity per hour(kg/hr) 24 36 55 75 100 180
Dry cycle per hour(time/hr) 1030*2 800*2 720*2 650*2 650*2 480*2
Product capacity(c.c./L) 40-500 65-1250 150-2500 500-5000 5L-10L 10L-20L
Product weight(g.) 5-40 10-100 20-170 40-280 200-370 500-900
Min./Max. diameter of product(m/m) 10-75 20-100 30-140 50-200 100-280 200-300
Extruding mouth outer diameter(m/m) 56 80 150 200 280 420
Mold center distance(m/m) * * * * * *
Clamping distance(m/m) 130-320 140-410 150-540 160-670 160-670 390-750
Length of mold capacity(m/m) 146-266 155-290 160-380 223-426 288-556 386-640
Width of mold capacity(m/m) 300 320 360 430 520 560
Machine net weight(kg) 7000 7400 7900 8500 9700 11500
Machine dimension(m) 3*1.8*2.5 3*1.9*2.5 3.2*2*2.8 4.2*2.1*2.9 5.2*2.3*3.7 5.8*3.3*4
MODEL FS-45 PDDO FS-55 PDDO FS-65 PDDO FS-75 PDDO FS-90 PDDO FS-100 PDDO
Material PE/PP PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 45 55 65 75 90 100
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 28/1 28/1
Screw R.P.M speed(r.p.m.) 15-61 15-60 15-60 15-58 15-56 20-65
Inveter motor(HP) 10 10 15 30 40 75
Oil hydraulic drive motor(HP) 7.5 10 10 15 15 25
Optional air compressor(HP) 10 15 15 20 30 30
Air pressurer(kg/cm2) 4-6 4-6 5-7 5-7 6-8 6-8
Clamping force(Ton) 1.5 4.4 6.9 10 13 26
Oil tank capacity(Gallon) 60 80 120 160 250 300
Nunber of heaters(ZONE) 8 7 8 8 10 10
Heating capacity(KW) 10 13.6 17.5 19 22 37
Total installed power(KW) 21.5 30 38 54 65 113
Extruding capacity per hour(kg/hr) 32 36 55 75 100 180
Dry cycle per hour(time/hr) 1030*2 800*2 720*2 650*2 650*2 480*2
Product capacity(c.c./L) 30-200 40-500 100-1000 280-2000 700-3000 2L-6L
Product weight(g.) 4-20 5-40 10-65 20-110 40-180 110-300
Min./Max. diameter of product(m/m) 10-65 20-70 30-85 40-110 50-150 100-220
Extruding mouth outer diameter(m/m) 42 50 65 80 150 200
Mold center distance(m/m) 85 120 140 160 220 250
Clamping distance(m/m) 130-320 140-410 150-540 160-670 160-670 390-750
Length of mold capacity(m/m) 146-370 155-290 160-380 223-426 288-556 385-640
Width of mold capacity(m/m) 300 320 360 430 520 560
Machine net weight(kg) 7200 7600 8200 9100 10100 11900
Machine dimension(m) 3*1.4*2.3 3.2*2*2.8 3.4*3*3 4.4*3.1*3.1 5.4*3.3*3.9 6.4*3.5*5.6
MODEL FS-55 PTDO FS-65 PTDO FS-75 PTDO FS-90 PTDO
Material PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 55 65 75 90
Screw L/D ratio(L/D) 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 15-60 15-60 15-58 15-58
Inveter motor(HP) 10 15 30 40
Oil hydraulic drive motor(HP) 10 10 15 15
Optional air compressor(HP) 15 15 20 20
Air pressurer(kg/cm2) 4-6 5-7 5-7 6-8
Clamping force(Ton) 4.4 6.9 10 13
Oil tank capacity(Gallon) 80 120 160 250
Nunber of heaters(ZONE) 9 10 10 12
Heating capacity(KW) 15 19.3 21.5 25
Total installed power(KW) 32 40 56.5 68
Extruding capacity per hour(kg/hr) 36 55 75 100
Dry cycle per hour(time/hr) 850*2 720*2 650*2 650*2
Product capacity(c.c./L) 15-300 50-600 100-1000 280-2000
Product weight(g.) 5-25 8-45 10-70 20-110
Min./Max. diameter of product(m/m) 10-55 20-70 30-90 40-90
Extruding mouth outer diameter(m/m) 40 55 80 98
Mold center distance(m/m) 85+85 100+100 120+120 120+120
Clamping distance(m/m) 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 155-290 160-380 233-426 288-556
Width of mold capacity(m/m) 320 360 430 520
Machine net weight(kg) 7800 8400 9400 10500
Machine dimension(m) 3.4*2.1*2.8 3.6*3.1*3 4.4*3.2*3.1 5.4*3.4*3.9
MODEL FS-45 PSSV FS-55 PSSV FS-65 PSSV FS-75 PSSV FS-90 PSSV
Material PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 45/25 55/25 65/25 75/25 90/25
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 15-61/5-25 15-60/5-25 15-60/5-25 15-58/5-25 15-56/5-25
Inveter motor(HP) 7.5/2 10/2 15/2 25/2 60/2
Oil hydraulic drive motor(HP) 7.5 10 10 15 30
Optional air compressor(HP) 5 7.5 7.5 10 15
Air pressurer(kg/cm2) 4-6 4-6 5-7 5-7 6-8
Clamping force(Ton) 3.9 4.4 6.9 9.5 5.2
Oil tank capacity(Gallon) 55 60 80 120 250
Nunber of heaters(ZONE) 6 6 7 7 11
Heating capacity(KW) 11.5 14.5 18.8 23 40
Total installed power(KW) 24.5 31.5 40.5 54.5 72.5
Extruding capacity per hour(kg/hr) 30 42 61 81 106
Dry cycle per hour(time/hr) 1030 880 720 650 65
Product capacity(c.c./L) 60-1000 150-2500 500-5000 5L-10L 10L-20L
Product weight(g.) 10-100 20-170 40-280 200-370 500-900
Min./Max. diameter of product(m/m) 20-100 30-140 50-200 80-260 50-340
Extruding mouth outer diameter(m/m) 56 80 150 200 280
Mold center distance(m/m) * * * * *
Clamping distance(m/m) 130-320 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 146-266 155-290 160-380 223-426 288-556
Width of mold capacity(m/m) 300 320 430 480 600
Machine net weight(kg) 3600 3800 4700 7600 8600
Machine dimension(m) 3*1.4*2.9 3*1.5*2.9 3.6*1.6*3.2 4.2*1.7*3.3 5.38*2.45*3.43
MODEL FS-45 PDSV FS-55 PDSV FS-65 PDSV FS-75 PDSV FS-90 PDSV
Material PE/PP PE/PP PE/PP PE/PP PE/PP
Screw diameter(m/m) 45/25 55/25 65/25 75/25 90/25
Screw L/D ratio(L/D) 24/1 24/1 24/1 24/1 28/1
Screw R.P.M speed(r.p.m.) 15-61/5-25 15-60/5-25 15-60/5-25 15-58/5-25 15-58/5-25
Inveter motor(HP) 7.5/2 10/2 15/2 25/2 40/2
Oil hydraulic drive motor(HP) 7.5 10 10 15 15
Optional air compressor(HP) 5 7.5 7.5 10 15
Air pressurer(kg/cm2) 4-6 5-7 5-7 5-7 6-8
Clamping force(Ton) 3.9 4.4 6.9 9.5 13
Oil tank capacity(Gallon) 55 60 80 120 250
Nunber of heaters(ZONE) 8 10 10 10 12
Heating capacity(KW) 14.5 18.8 20.3 25 36
Total installed power(KW) 27.5 36.5 43 57 80
Extruding capacity per hour(kg/hr) 30 42 61 81 106
Dry cycle per hour(time/hr) 1030 880 720 650 650
Product capacity(c.c./L) 40-500 100-1250 280-1800 0.5L-2.5L 1L-5L
Product weight(g.) 5-40 10-100 20-170 40-170 100-160
Min./Max. diameter of product(m/m) 20-70 30-85 40-100 40-130 100-160
Extruding mouth outer diameter(m/m) 42 50 65 80 150
Mold center distance(m/m) 100 120 140 160 200
Clamping distance(m/m) 130-320 140-410 150-540 160-670 160-670
Length of mold capacity(m/m) 146-266 155-290 160-380 223-426 288-556
Width of mold capacity(m/m) 300 320 430 480 560
Machine net weight(kg) 3700 3900 4800 7700 8700
Machine dimension(m) 3*1.6*2.9 3*1.7*2.9 3.6*1.8*3.2 4.2*1.9*3.3 5.2*2.1*4.1
FOTÓK
Mintaüvegek
FOTÓK
Falvastagságszabályzó és Érintőképernyő
FOTÓK
Hajlíott karos szerszám zárás
FOTÓK
Kétállású típus
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS
PHOTOS







ALKALMAZÁS

Hand washing bottle / cleaning supplies

Hand washing bottle / cleaning supplies

Water bottle or specific container

Water bottle or specific container

Oil bottle / oil barrel

Oil bottle / oil barrel

Mask/Closed Wound Drainage Systems

Mask/Closed Wound Drainage Systems

Household/Cosmetics

Household/Cosmetics

Household/Cleaning product bottle

Household/Cleaning product bottle

Household/Cosmetics

Household/Cosmetics

Outdoor supplies/Bird balls

Outdoor supplies/Bird balls

Household/Cosmetics

Household/Cosmetics

Closed Wound Drainage Systems

Closed Wound Drainage Systems

Toys

Toys

Household/Cleaning product bottle

Household/Cleaning product bottle

Automotive

Automotive

Household/Cosmetics

Household/Cosmetics

Pesticide bottle

Pesticide bottle

Mascara bottle

Mascara bottle

Household/Cosmetics

Household/Cosmetics

20L Bucket (20L Jerry can)

20L Bucket (20L Jerry can)

© Copyright 2019 FULL SHINE MŰANYAGIPARI GÉPEK CO. All Rights Reserved.-Site Map

PRM Taiwan | Designed by Polaris